Mitsubishi Electric Mr. Slim PUHZ-RP1.6VHA Manual de instalación

Air-ConditionersPCA-RP·GAEnglishINSTALLATION MANUALFor safe and correct use, please read this installation manual thoroughly before installing the air

Please be sure to put the contact address/telephone number onthis manual before handing it to the customer.• Low Voltage Directive 73/23/ EEC• Electro

2s Before installing the unit, make sure you read all the “Safety precau-tions”.s Please report to your supply authority or obtain their consent befor

32. Installation location3. Installing the indoor unit3.1. Check the indoor unit accessories (Fig. 3-1)The indoor unit should be supplied with the fol

43. Installing the indoor unitFig. 3-7Fig. 3-4Fig. 3-5Fig. 3-63.2.4. Indoor unit preparation (Fig. 3-4)1. Install the suspending bolts. (Procure the W

54.1. Connecting pipes (Fig. 4-1)• When commercially available copper pipes are used, wrap liquid and gas pipeswith commercially available insulation

6 L1N2S1 S2 S35. Drainage piping workInstalling procedures (Fig. 5-2)1. Attach the joint socket 5 supplied with the unit to the drain port on the unit

76. Electrical work6.2. Remote controller6.2.1. For wired remote controller1) Installing procedures(1) Select an installing position for the remote co

86. Electrical workFunction tableSelect unit number 00ModePower failure automatic recoveryIndoor temperature detectingLOSSNAY connectivityPower voltag

9• For description of each check code, refer to the following table.1 Check code Symptom 2 Buzzer sound 3 OPE LEDP1 Intake sensor error Single beep ×